LED T10 TUBES

Tweet

ArmadilloLED - Evolution In Lighting Barracuda Series LED T10 Tubes replace Standard Fluorescent T10 Tubes.

Unique Armadillo LED starter (fuse), high brightness 6/7lm per led.

T10 – 2ft – 300mm – 18W replace with  Barracuda LED Tube T10 2ft 600mm 9W

T10 – 3ft – 900mm – 30W replace with  Barracuda LED Tube T10 3ft 900mm 14W

T10 – 4ft – 1200mm – 36W replace with  Barracuda LED Tube T10 4ft 1200mm 18W

T10 – 5ft – 1500mm – 58W replace with  Barracuda LED Tube T10 5ft 1500mm 22W

T10 – 6ft – 1800mm – 70W replace with  Barracuda LED Tube T10 6ft 1800mm 30W

T10 – 8ft – 2400mm – 100W replace with  Barracuda LED Tube T10 8ft 2400mm 36W

   BARRACUDA LED T10 Tubes Product Guide

   BARRACUDA LED T10 Enhanced Capital Allowance (ECA) Scheme Eligibility Statement

TEST STANDARDS COMPLIANCE:

CE-EMC    

                  EN55015:2006+A2:2009
                  EN61547:2009
                  EN61000-3-2:2006+A2:2009
                  EN61000-3-3:2008
CE-LVD
                  EN60598-1:2008+A11:2009
FCC
                  Com pliance with 47 CFR PART 15 & ANSI C634.
ROHS

                  EPA3050B:1996                  (2002/95/EC) EN1122B:2001
                  EPA3060A:1996                  EPA3052:1996
                  EPA7196A:1992                  EPA3540C:1996
                  EPA8270D:2007 

DOWNLOAD CERTIFICATES

Features:

Colour CCT (Standard Options): 

3000K - 830 (Warm White)

4100K - 840 (Cool White)

5000K - 850 (Cool White)

6500K - 865 (Daylight)

Acrylic – Three lens Options:

CLEAR - Maximum light output for placing behind diffusers, or where high light level is required.

OPAQUE - Ideal retrofit replacement with CAT2 Louvres, and any other “open” fixtures. Clean aesthetic colour, used in areas with direct eye contact.

RIBBED - Light diffraction, optimising the sparkle available form LED.

HIGH GRADE BONDED PCB and EXTRUSION for greater heat dissipation and light duration.

WIRING CONNECTION - Safety benefit of wiring connection. Requirement to ensure the pins on either side of the tube are without electricity when only one side of the tube is connected to the lamp frame. Additional isolation replacement for existing starter also provided.

   BARRACUDA LED T10 Tubes Instruction, Safety Installation, Wiring Manual

* * * * *

BE AWARE of OTHER fitting and re-wiring requirement for some LED Tubes available on market.

Many serious defects (that endanger the safety) were found in the performed partial tests to fulfill the market surveillance needs.

During mounting the free end connector of the led tube might be live.

Protection against electric shock in the case of one-sided insertion (EN 60598-1, 8.2.1 and Annex A) was missing in tested Led T8 tubes.

LED tubes that already recall by ordered by authorities.

DOWNLOAD - EUROPA.EU - Consumer Affairs - Safeguarding Consumers' Interests (click link)

The Armadillo LED Barracuda Tubes WILL NOT light until both ends are connected to the mains.

* * * * *